Industrial Electronics Repair & Electrical Drives Repair Services
Omram Servo & Control Services repairs industrial electronic components and electrical drives for manufacturers, machine shops, and automation facilities across Canada and the USA. Our engineers diagnose and repair down to the component level - restoring equipment to full operating condition instead of forcing you into a costly replacement.
We work on servo motors, servo drives, AC and DC drives, PCBs, CNC controls, teach pendants, and power supplies, across major brands including Siemens, ABB, Allen-Bradley, FANUC, Rexroth, Indramat, Schneider Electric, Baldor, Baumuller, and Powertec.
We also repair a wide range of industrial electronics, including PLCs, HMIs, I/O modules, industrial controllers, control boards, power supplies, CNC electronics, and other automation components used in manufacturing and production equipment.
What Is Industrial Electronics Repair?
Industrial electronics repair is the process of diagnosing, repairing, and restoring the electronic components that keep production equipment running - from control boards and power supplies to motion controllers and CNC systems. Unlike a straight swap-out, repair work happens at the component level: technicians isolate the failed part (a capacitor, IGBT, encoder, driver chip, or power stage) and replace or rebuild it, rather than discarding the entire assembly.
This matters for two reasons: it costs less than buying new or remanufactured equipment, and for older or discontinued models, repair is often the only option available.
Our industrial electronics repair process:
- Intake & Inspection - Visual and electrical inspection to identify visible damage and confirm the reported fault.
- Diagnostics - Component-level testing to isolate the root cause (power stage failure, control board fault, sensor/feedback issue, etc.
- Quote & Approval - A written repair quote before any work begins - no surprise costs.
- Repair - Component-level rework using OEM-spec or better parts.
- Load Testing & Burn-In - Units are tested under simulated load conditions before they leave our facility.
- Warranty & Shipping - Every repair comes with a warranty and full documentation of the work performed.
Industrial Electronics and Equipment We Repair
Beyond electrical drives, Omram Servo & Control Services repairs a broad range of industrial electronic and automation equipment used in manufacturing and production environments.
Our repair services include:
- Servo motor and servo system repair
- AC drive and VFD repair
- DC drive repair
- Servo drive repair
- PLC and industrial controller repair
- HMI and operator interface repair
- PCB and control board repair
- CNC machine control and electronic repair
- Teach pendant repair
- Power supply repair
- Industrial I/O module repair
- Powertec motor repair
- Industrial automation system troubleshooting
Whether you need a single control board repaired or support for a larger automation system, our engineers use component-level diagnostics and testing to identify the fault and restore the equipment to working condition.
Industries We Serve
Industrial electronic failures can affect production across a wide range of industries. Omram Servo & Control Services supports manufacturers, machine shops, and automation facilities with industrial electronics and electrical drive repair for equipment used in demanding production environments.
We serve customers across industries including:
- Manufacturing
- CNC machining and automation
- Automotive
- Food processing
- Packaging
- Plastics
- Steel
- Paper and printing
- Glass
- Stone and concrete
Our repair services help businesses reduce equipment downtime, keep existing machinery operating, and extend the useful life of industrial electronics and drive systems.
Common signs your drive needs repair:
A failing electrical drive can cause production interruptions, inconsistent machine performance, and unexpected downtime. Common warning signs that your AC, DC, or servo drive may require professional repair include:
- Fault or error codes appearing on the drive display
- Drive powers on but produces no motor output
- Overheating or repeated thermal shutdowns
- Overcurrent, overvoltage, or undervoltage faults
- Loss of communication with the PLC, CNC, or machine controller
- Intermittent faults that temporarily clear after restarting
- Unusual motor noise, vibration, or unstable operation
- Loss of motor speed, torque, or positioning control
- Encoder, tachometer, or other feedback errors
- Failed cooling fans or signs of overheating
- Burnt components, damaged circuit boards, or visible physical damage
- Drive faults that occur during machine start-up or under load
Early diagnosis can help identify the underlying cause before a drive failure results in extended machine downtime or additional equipment damage.
Brands we service for drive repair include: Siemens, ABB, Allen-Bradley/Rockwell, Rexroth Indramat, Baldor, Schneider Electric, and Baumuller.
Full-Service Industrial Electronics Repair - All Brands, All Project Sizes
Beyond drives, our team handles the full range of industrial electronic repair work:
- Servo motor repair
- PCB (printed circuit board) repair and reverse engineering
- CNC machine control repair
- Teach pendant repair
- Powertec motor repair
- Power supply repair
- Industrial and automation system troubleshooting
Whether you're repairing a single component for a small production line or managing repairs across a large manufacturing facility, our engineers scale the process to fit - with the same diagnostic rigor and quality control on every job.
Why Manufacturers Choose Omram Servo & Control Services
- Several years of experience in repairing industrial electronics and drives across North America
- 1000+ successful repairs completed
- Component-level repair - not board-swap guesswork
- Written quote before work begins, no hidden costs
- 5-7 days standard turnaround, with same-day emergency service available
- Industry-standard warranty on all completed repairs
- Facilities in Mississauga, ON and Grand Island, NY serving Canada and the USA
Frequently Asked Questions
What is the difference between industrial electronics repair and buying a replacement part?
Repair restores your existing component at the component level, which is typically faster and less expensive than sourcing a new or remanufactured replacement - and is often the only option for older or discontinued equipment.
How much does electrical drive repair cost?
Cost depends on the drive type, fault, and brand. We provide a written quote after diagnostics and before any repair work begins, so there are no surprise charges.
How long does drive or servo repair take?
Most repairs are completed within 5–7 business days, with rush service available for urgent downtime situations.
Do you repair drives and electronics for brands you don't manufacture?
Yes. We repair third-party equipment from Siemens, ABB, Allen-Bradley, FANUC, Rexroth, Indramat, Schneider Electric, Baldor, Baumuller, Powertec, and other major industrial brands.
Do you offer emergency or rush repair service?
Yes - contact our team directly for expedited diagnostics and repair on critical downtime equipment.
What warranty do you provide on repairs?
All repairs include an industry-standard warranty that covers parts and labour.
Can you repair obsolete or discontinued industrial electronics?
Yes. We repair many obsolete and discontinued industrial electronics and drives. Component-level repair can help keep older machinery running when replacement parts are unavailable or difficult to source.
Do I need to send the entire machine for repair?
No. In most cases, you only need to send the failed component, drive, control board, or other unit for assessment. Larger or on-site repair requirements can be discussed based on the equipment and repair needs.